Mitsuya Limited
600 Srinakarin Road, Suanluang Suanluang Bangkok 10250 Thailand.
Tel. (662) 322-3333 Fax. (662) 322-3400
E-mail :
Service@emitsuya.com
www.emitsuya.com
Skip Navigation Links
Depth of cut (Unit: mm)
Grinding method Finishing level Soft steel Quenched steel same as or over HRC 41 Tool steel Stainless steel
Heat-proof steel
Cast steel
Cylindrical Plunge cut Finish 0.005-0.01 0.01-0.02 0.005-0.01 0.005-0.01 0.005-0.01
Rough 0.02-0.04 0.03-0.04 0.02-0.03 0.02-0.03 0.02-0.04
Traverse cut Finish 0.005-0.015 0.005-0.01 -0.005 - 0.005-0.01
Rough 0.015-0.04 0.02-0.04 0.005-0.01 - 0.015-0.04
Centerless Finish 0.005-0.01 0.005-0.015 0.02-0.03 - -
Rough 0.015-0.03 0.02-0.04 0.02-0.03 0.02-0.03 0.015-0.03
Internal Finish 0.005-0.01 0.005-0.01 -0.005 -0.005 0.005-0.01
Rough 0.015 0.03 0.015-0.03 - 0.015-0.03
Serface Horizontal Finish 0.005-0.01 0.005-0.01 0.005-0.015 - 0.005-0.01
Rough 0.015-0.03 0.015-0.03 0.02-0.04 0.02-0.03 0.015-0.04
Vertical Finish - 0.015-0.02 0.005-0.01 - 0.005-0.015
Rough 0.005-0.01 - 0.015-0.02 - 0.03-0.04

 
Grinding method Finishing level High-speed steel Cemented carbide
Tool grinding Finish -0.005 0.005
Rough 0.01-0.02 0.005-0.015